PROFESSIONAL
GYPSUM
Interior Finishing Products

PRODUCTS                           


PRIME COAT PVA DRYWALL PRIMER 


PRIME COAT
is a ready to use PVA drywall primer that is used between the final finish coat of compound and the application of texture. Using this product will reduce texture variations on "orange peel" applications and promote consistent drying times for "knockdown" applications.

PRIME COAT can also be used as a paint primer as the first complete coat of paint applied in a painting system to an uncoated surface prior to the application of an intermediate coat or topcoat.


  • Available in 5 gallon pails, 55 gallon drums and 275 gallon totes.
  • Low VOC for GREEN friendly applications.
  • Coverage of 200 to 400 feet per gallon. Highest in the industry.
  • CLICK HERE for our SUBMITTAL  
LEVEL 5 


LEVEL 5 is designed to achieve a LEVEL 5 finish when applied in lieu of a "skim coat" as described in the Levels of Gypsum Board Finish published by the Gypsum Association. GA-214.

  • Available in 5 gallon pails, 55 gallon drums and 275 gallon totes.
  • Single coat application.
  • Can be used over multiple surfaces such as concrete, block and new drywall.
  • Coverage of 100 to 130 feet per gallon when applied at 15 to 20 wet mils.
  • CLICK HERE for our SUBMITTAL   
PRIME PERM VAPOR BARRIER (SINGLE COAT) 


PRIME PERM VAPOR BARRIER is a perm rated PVA designed to create a vapor seal of 1.0 or below when applied at 1 mil dry in 1 coat.


  • Available in 5 gallon pails, 55 gallon drums and 275 gallon totes.
  • Single coat application achieves a 1.0 or below perm rating when applied at 1 mil dry.
  • Low VOC for GREEN friendly applications.
  • Coverage of 200 to 300 feet per gallon.
  • CLICK HERE for our SUBMITTAL
Website Builder